Ana içeriğe geç

Apple Watch Series 3 Screen Replacement Girişe yapılan değişiklikler

Düzenleyen: Tobias Isakeit

Düzenleme onaylandı tarafından Tobias Isakeit

Önce
Sonra
Değiştirilmemiş
Introduction
Use this guide to replace a brocken, cracked or defective display of your Apple Watch Series 3.
Use this guide to replace a broken, cracked, or defective display on your '''Apple Watch Series 3'''.
Make sure to update your Apple Watch to '''watchOS 5''' or later (and the paired iPhone to '''iOS 12''' or later) to avoid pairing issues after a display replacement.
Replacing the display can cause issues with '''Apple Pay'''. If possible, to reduce the likelihood of problems, delete all your ApplePay account info before the replacement, and then re-enter it with the new display installed.
Time Required Max
1 saat
2 saat
Conclusion
To reassemble your device, follow these instructions in reverse order. Don’t forget to [guide|116326|apply new adhesive|new_window=true] before putting the display back on.

Parçalar

  • Apple Watch (42 mm) Adhesive Strips x1 added.
  • Apple Watch (38 mm) Adhesive Strips x1 added.
  • Apple Watch (42 mm Series 3 Cellular) Screen x1 added.
  • Apple Watch (42 mm Series 3 GPS) Screen x1 added.
  • Apple Watch (38 mm Series 3 Cellular) Screen x1 added.
  • Apple Watch (38 mm Series 3 GPS) Screen x1 added.
  • Apple Watch (42 mm) Adhesive Strips x3 removed.
  • Apple Watch (38 mm) Adhesive Strips x3 removed.