Ana içeriğe geç

Giriş Geçmişi: How to turn on [Alcatel Pixi 4 8050G] with BAKU power supply and reactivate dead battery

Düzenleyen: @HectorNavarroMX

Düzenleme onaylandı tarafından @HectorNavarroMX

Önce
Sonra
Değiştirilmemiş
Cihaz
Alcatel Pixi 4 8050G
Type
technique
Title
How to turn on [Alcatel Pixi 4 8050G] with BAKU power supply and reactivate dead battery
Introduction
Alcatel Pixi 4 8050G that does not turn on.
Connect the (logicboard) to the Baku source at 3.4V to test the ignition without the battery.
Then, reactivate the battery with the baku source at 5V.
Note: the phone was immediately turned off with the BAKU source because it does not detect the battery IC (where it controls charging). It means that the (logicboard) works and you only need to reactivate the battery or buy a new one.
Time Required Min
1 saat
Time Required Max
1 saat
Objectid

Önce

Sonra

Difficulty
Moderate
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
Public
Hayır

İşaretler

  • DANGER added.
  • Community-Contributed Guide added.