Ana içeriğe geç

iPad Pro 10.5" Opening Procedure Girişe yapılan değişiklikler

Düzenleyen: Jeff Suovanen

Düzenleme onaylandı tarafından Jeff Suovanen

Önce
Sonra
Değiştirilmemiş
Thing
Screen
Opening Procedure
Title
iPad Pro 10.5" Screen ReplacementOpening Procedure
Introduction
Use this guide to replace a broken screen (a.k.a. display or front panel assembly) on an iPad Pro 10.5”. The screen consists of a glass touch panel or digitizer fused to an LCD display. This entire assembly must be replaced as a single unit.
Note that the fingerprint scanner in the home button is paired to the iPad's logic board. In order to maintain Touch ID functionality, you must keep the original home button and transfer it onto the new screen.
This repair can fix issues like a cracked glass digitizer, a non-responsive touchscreen, or a broken LCD screen.
You’ll need '''replacement adhesive''' to reattach components when reassembling the device.
Prerequisite-only guide for detaching the display assembly from the iPad.
Time Required Min
30 dakika
1 saat
Time Required Max
1 saat
3 saat
Imageid
Önce
Sonra
Difficulty
Moderate
Difficult
Conclusion
Compare your new replacement part to the original part. You may need to transfer remaining components or remove adhesive backings from the new part before installing.

'''To reassemble your device, follow this guide in reverse order. '''

[[E-Waste|Take your e-waste to an R2 or e-Stewards certified recycler|new_window=true]].

Repair didn’t go as planned? Check out our [https://www.ifixit.com/Answers/Device/iPad%20Pro%2010.5%22|Answers community] for troubleshooting help.
Summary
This guide shows how to remove and replace a cracked or faulty screen (or display) in an iPad Pro 10.5".
Prerequisite-only guide for opening the iPad and detaching the screen.

Aletler

  • Phillips #00 Screwdriver x1 added.
  • Isopropyl Alcohol x1 added.
  • Phillips #000 Screwdriver x1 removed.
  • Halberd Spudger x1 removed.

İşaretler

  • Prerequisite Only added.