Ana içeriğe geç

iPad Pro 10.5" Home Button Replacement Girişe yapılan değişiklikler

Düzenleyen: Jeff Suovanen

Düzenleme onaylandı tarafından Jeff Suovanen

Önce
Sonra
Değiştirilmemiş
Introduction
Use this guide to replace a defective home button or to transfer the home button in the 10.5” iPad Pro ononto a new display assembly.
'''Replacing the home button will not restore Touch ID function. The Touch ID fingerprint scanner in the home button is paired to the iPad's logic board.''' In order to maintain Touch ID functionality, if you replace the screen, you must carefully transfer your original home button to the new display assembly.
You’ll need '''replacement adhesive''' to reattach components when reassembling the device.
Time Required Max
2 saat
3 saat
Imageid
Önce
Sonra
Difficulty
Moderate
Difficult

Aletler

  • Phillips #00 Screwdriver x1 added.
  • Isopropyl Alcohol x1 added.
  • Phillips #000 Screwdriver x1 removed.