Skip to main content

Changes to Samsung Galaxy S9 Rear Camera Bezel With Fingerprint Sensor Replacement Introduction

Düzenleyen: Dominik Schnabelrauch

Düzenleme onaylandı by Dominik Schnabelrauch

Silindi
Eklendi
Değiştirilmemiş
Cihaz
[ ]Samsung Galaxy S9
Type
[ ]replacement
Thing
[ ]Fingerprint Sensor and Camera Lens Cover
Title
[ ]Samsung Galaxy S9 Fingerprint Sensor and Camera Lens Cover Replacement
Introduction
Use this guide to remove the fingerprint sensor and the camera lens cover in the Samsung Galaxy S9. [ … ] Opening the Samsung Galaxy S9 will '''damage the waterproof sealing''' on the device. If you do not replace the adhesive seals, your phone will '''function normally''', but will '''loose its water-protection'''. [ … ] You’ll need '''replacement adhesive''' to reattach components when reassembling the device.
Time Required Min
20 dakika
Time Required Max
35 dakika
Imageid
Önce
Sonra
Difficulty
Moderate
Conclusion
'''Secure the new back cover''' with pre-cut adhesive or double-sided adhesive tape. [ … ] To reassemble your device, follow these instructions in reverse order. [ … ] After installing the rear cover, apply strong, steady pressure to your phone for several minutes to '''help the adhesive form a good bond''', such as by placing it under a stack of heavy books.
Author
Public
Hayır
Summary
[ ]This guide shows how to remove the fingerprint sensor and the camera lens cover in the Samsung Galaxy S9.

Kılavuz Ön Koşulları

Aletler

  • iOpener x1 added.
  • iFixit Opening Picks set of 6 x1 added.
  • Suction Handle x1 added.
  • Spudger x1 added.
  • Tweezers x1 added.

Parçalar

  • Galaxy S9 Rear Glass Panel/Cover x1 added.
  • Galaxy S9 Rear Cover Adhesive x1 added.

İşaretler

  • In Progress added.

Adımlar

Step #: 1
Önce
Sonra
Step #: 2
Önce
Sonra
Step #: 3
Önce
Sonra
Step #: 4
Önce
Sonra
Step #: 5
Önce
Sonra
Step #: 6
Önce
Sonra
Step #: 7
Önce
Sonra