Ana içeriğe geç

How to Apply Custom-cut Adhesive Strips Girişe yapılan değişiklikler

Düzenleyen: Arthur Shi

Düzenleme onaylandı tarafından Arthur Shi

Önce
Sonra
Değiştirilmemiş
Introduction
Follow this guide if you are unsure how to apply custom-cut adhesive to your device. The adhesive could be for a screen, back cover, battery, etc. If the device’s repair guide has specific adhesive instructions, those instructions precede this guide.
For Samsung Galaxy S adhesive strips, [https://www.ifixit.com/Guide/Samsung+Galaxy+S+Series+General+Battery+Adhesive+Replacement/123541|follow this guide].
If you are using general Tesa adhesives, [https://www.ifixit.com/Guide/How+to+Use+a+Pre-Cut+Adhesive+Sheet/113604|follow this guide].
Time Required Min
10 dakika
Time Required Max
40 dakika

Aletler

  • Spudger x1 added.
  • iFixit Opening Tool x1 added.
  • Tweezers x1 added.
  • Isopropyl Alcohol x1 added.