Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Metabo sander SRE 329 SR E 326 327 328 dampers Replacement Girişe yapılan Değişiklikler

Düzenleyen: Mike B

Düzenleme onaylandı tarafından Mike B

Önce
Sonra
Değiştirilmemiş
Introduction
When the dampners centering the bottom plate are worn, and the sanding plate is off balance, there can be a loud banging noise of metal to metal impact. [ … ] In particular when you are touching something sideways with the sanding plate. MEtabo unfortunately does not supply the parts anymore, but for most household use, the sander will still ahve a lot of life in it. [ … ] So I stipped, it, made the part by hand, not so hard…you can get something from a rubber shop, or if you have access to very large o-rings, use one of those. [ … ] Looks like same partnumber for various machines. 34409178
Conclusion
To reassemble your device, follow these instructions in reverse order.Fairly easy to strip, and put new dampners in, but you need to make them yourself somehow.
To reassemble your device, follow these instructions in reverse order.Fairly easy to strip, and put new dampners in, but you need to make them yourself somehow.
Summary
there is can be a regular loud banging noise when you touch something with the bottom plate. Looks like same partnumber for various machines. 34409178
there is can be a regular loud banging noise when you touch something with the bottom plate. Looks like same partnumber for various machines. 34409178

Aletler

  • patience to make rubber dampners x4 added.