Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Yuneec ST10 Plus Camera Switch Replacement Girişe yapılan değişiklikler

Düzenleyen: Austin Blakely

Düzenleme onaylandı tarafından Austin Blakely

Önce
Sonra
Değiştirilmemiş
Introduction
This guide will provide a step by step process to the removal and replacement of the shoulder buttons controlling the camera switch. Thisor video on the Yuneec ST10 Plus drone controller. The lefthand switch triggers the drone camera to take a snapshot and the righthand switch toggles the recording feature. If either of these functionalities stop working and you’ve troubleshot the problem to the physical switches, this guide can also be usedhelp you to withreplace the video switch.malfunctioning button and resume the functionality of the remote. [ … ] Good news: the two switches are connected with cable connectors, so no soldering will be required to replace them!
This guide will provide a step by step process to the removal and replacement of the shoulder buttons controlling the camera switch. Thisor video on the Yuneec ST10 Plus drone controller. The lefthand switch triggers the drone camera to take a snapshot and the righthand switch toggles the recording feature. If either of these functionalities stop working and you’ve troubleshot the problem to the physical switches, this guide can also be usedhelp you to withreplace the video switch.malfunctioning button and resume the functionality of the remote. [ … ] Good news: the two switches are connected with cable connectors, so no soldering will be required to replace them!

Aletler

  • 4 mm Hex Key x1 added.
  • 5 mm Hex Key x1 added.

İşaretler

  • In Progress removed.
  • Student In Progress removed.