Ana içeriğe geç

Giriş Geçmişi: Huawei Mate 20 LCD & Digitizer Replacement

Düzenleyen: Dominik Schnabelrauch

Düzenleme onaylandı tarafından Dominik Schnabelrauch

Önce
Sonra
Değiştirilmemiş
Cihaz
Huawei Mate 20
Type
replacement
Thing
LCD & Digitizer
Title
Huawei Mate 20 LCD & Digitizer Replacement
Introduction
Use this guide to replace a broken or defective LCD Screen & Digitizer in your Huawei Mate 20.
'''Note''': This guide instructs you to replace only the screen while leaving the original frame and motherboard in place. However, some replacement screens for this phone come pre-installed in a new frame (a.k.a. chassis), which requires a very different procedure. Make sure you have the correct part before starting this guide.
Opening the Huawei Mate 20 will '''damage the waterproof sealing''' on the device. If you do not replace the adhesive seals, your phone will '''function normally''' but will '''lose its water-protection'''.
Due to the phone’s design, you need to remove the lithium-ion battery in order to remove the screen. '''Reusing a deformed battery after it been removed is a potential safety hazard. Replace it with a new battery.'''
'''Before disassembling your phone, discharge the battery below 25%'''. The battery can catch fire and/or explode if accidentally punctured, but the chances of that happening are much lower if discharged.
You’ll need '''replacement adhesive''' to reattach components when reassembling the device.[br]
Time Required Min
Tahmin yok
Time Required Max
Tahmin yok
Difficulty
Moderate
Conclusion
To reassemble your device, follow these instructions in reverse order.
If possible, turn on your phone and test your repair before installing new adhesive and resealing the phone.
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler]].
Repair didn’t go as planned? Check out our Answers community for troubleshooting help.
Author
Public
Hayır

İşaretler

  • In Progress added.