Ana içeriğe geç

iPhone SE 2020 Front Camera And Sensor Cable Replacement Girişe yapılan değişiklikler

Düzenleyen: Adam O'Camb

Düzenleme onaylandı tarafından Adam O'Camb

Önce
Sonra
Değiştirilmemiş
Cihaz
iPhone SE 2020
Type
replacement
Thing
Front Camera And Sensor Cable
Title
iPhone SE 2020 Front Camera And Sensor Cable Replacement
Introduction
Follow this guide to replace the front camera and sensor cable for your iPhone SE 2020. This assembly includes a microphone, front camera, proximity sensor, and ambient light sensor.
Time Required Min
40 dakika
Time Required Max
1 saat
Imageid
Önce
Sonra
Difficulty
Moderate
Conclusion
Compare your new replacement part to the original part. You may need to transfer remaining components or remove adhesive backings from the new part before installing.
To reassemble your device, follow these instructions in reverse order.
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Check out our [https://www.ifixit.com/Answers/Device/iPhone%20SE%202020|iPhone SE 2020] Answers community for troubleshooting help.
Author
Public
Hayır
Summary
Replace the front camera and sensor cable for the iPhone SE 2020.

Kılavuz Ön Koşulları

Aletler

  • P2 Pentalobe Screwdriver iPhone x1 added.
  • Suction Handle x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • iOpener x1 added.
  • Spudger x1 added.
  • Tweezers x1 added.
  • Phillips #000 Screwdriver x1 added.

İşaretler

  • In Progress added.