Ana içeriğe geç

iPhone SE 2020 Logic Board Replacement Girişe yapılan değişiklikler

Düzenleyen: Adam O'Camb

Düzenleme onaylandı tarafından Adam O'Camb

Önce
Sonra
Değiştirilmemiş
Cihaz
iPhone SE 2020
Type
replacement
Thing
Logic Board
Title
iPhone SE 2020 Logic Board Replacement
Introduction
Follow this guide to remove and replace the logic board for the iPhone SE 2020.
'''Note:''' Each iPhone's logic board and Touch ID fingerprint sensor are paired at the factory, so replacing the logic board will disable Touch ID ''unless'' you also install a replacement home button that has been properly paired to your new logic board.
Time Required Min
45 dakika
Time Required Max
2 saat
Imageid
Önce
Sonra
Difficulty
Moderate
Conclusion
'''To reassemble your device, follow the above steps in reverse order.'''
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Check out our [https://www.ifixit.com/Answers/Device/iPhone%20SE%202020|Answers community] for troubleshooting help.
Author
Public
Hayır
Summary
Remove and replace the logic board in the iPhone SE 2020.

Kılavuz Ön Koşulları

Aletler

  • P2 Pentalobe Screwdriver iPhone x1 added.
  • Suction Handle x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • iOpener x1 added.
  • Spudger x1 added.
  • Tweezers x1 added.
  • Phillips #000 Screwdriver x1 added.
  • SIM Card Eject Tool x1 added.
  • iPhone Standoff Screwdriver Bit x1 added.

İşaretler

  • In Progress added.