Ana içeriğe geç

MacBook Pro 13" Touch Bar 2019 Screen Replacement Girişe yapılan değişiklikler

Düzenleyen: Sam Omiotek

Düzenleme onaylandı tarafından Sam Omiotek

Önce
Sonra
Değiştirilmemiş
Cihaz
MacBook Pro 13" Touch Bar 2019
Type
replacement
Thing
Screen
Title
MacBook Pro 13" Touch Bar 2019 Screen Replacement
Introduction
Follow this guide to replace a screen on a 2019 MacBook Pro 13" Touch Bar model with four Thunderbolt ports.
'''For your safety, drain your MacBook Pro's battery below 25% charge before you begin.'''
Time Required Min
1 saat
Time Required Max
2 saat
Imageid
Önce
Sonra
Difficulty
Moderate
Conclusion
Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
'''To reassemble your device, follow the above steps in reverse order.'''
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Try some basic [[Troubleshooting Problems After a Repair|troubleshooting]] or search our [https://www.ifixit.com/Answers/Device/MacBook%20Pro%2013%22%20Touch%20Bar%202019|Answers community] for help.
Author
Public
Hayır
Summary
How to replace a screen on a 2019 MacBook Pro 13" Touch Bar model with four Thunderbolt ports.

Kılavuz Ön Koşulları

Aletler

  • Suction Handle x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • P5 Pentalobe Screwdriver Retina MacBook Pro and Air x1 added.
  • T3 Torx Screwdriver x1 added.
  • Spudger x1 added.
  • T5 Torx Screwdriver x1 added.
  • Tweezers x1 added.
  • P2 Pentalobe Screwdriver iPhone x1 added.
  • TR8 Torx Security Screwdriver x1 added.

Parçalar

  • MacBook Pro 13" Retina (Touch Bar, Late 2016-2020) Display Cable Brackets x1 added.