Eşyalarını Tamir Et Topluluk Mağaza

Giriş Geçmişi: iPad Pro 12.9" Display Assembly Replacement

Düzenleyen: Arthur Shi —

Düzenleme onaylandı tarafından Arthur Shi

Önce
Sonra
Değiştirilmemiş
Cihaz
iPad Pro 12.9"
Type
replacement
Thing
Display Assembly
Title
iPad Pro 12.9" Display Assembly Replacement
Introduction
Follow the steps in this guide to replace the display assembly in an iPad Pro 12.9", or to access other internal components for servicing.
Note that the Home Button installed in your original display assembly is paired to the iPad's logic board, and will need to be [guide|95750|removed and transferred to the new display|new_window=true] to retain Touch ID functionality.
***Before beginning, check to see if your replacement part has a daughterboard adhered to its back.*** If so, this guide will work for you. Otherwise, you will need to transfer the board from the old display to the new one. Transferring the daughterboard from the original to replacement unit will require specialty microsoldering equipment and we recommend DIY users source a new part rather than attempt the procedure.
Parts of this guide were shot with a Wi-Fi model and as such the internals may look slightly different from the LTE model. The procedure is the same for both models except where noted.
***Be very careful when you isolate the battery using a battery blocker.*** The battery contacts are easily damaged, resulting in irreversible damage. If you choose to complete the guide without isolating the battery, avoid using metal tools except when completely necessary (like when removing screws) to prevent shorting the battery and damaging sensitive circuit components.
The opening procedure for this iPad Pro is shown using a Halberd Spudger. If you don’t have one, ***you can use an opening pick instead***—the process is the same.
Time Required Min
1 saat
Time Required Max
2 saat
Imageid
Önce
Sonra
Difficulty
Moderate
Conclusion
Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
***To reassemble your device, follow the above steps in reverse order.***
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Check out our [link|https://www.ifixit.com/Answers/Device/iPad%20Pro%2012.9%22|Answers community] for troubleshooting help.
Author
Evan Noronha
Public
Evet

Aletler

  • iOpener x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • Spudger x1 added.
  • Tweezers x1 added.
  • Suction Handle x1 added.
  • Battery Blocker x1 added.
  • Halberd Spudger x1 added.
  • Deck of Cards x1 added.
  • Packing Tape x1 added.
  • Safety Glasses x1 added.

Parçalar

  • iPad Pro 12.9" Screen x1 (featured) added.
  • iPad Pro 12.9" (2015) Adhesive Strips x1 added.
  • Tesa 61395 Double-Sided Tape x1 added.