Ana içeriğe geç

Giriş Geçmişi: Sony h.ear on 3 Headband Arch teardown

Düzenleyen: Caius Nocturne

Düzenleme onaylandı tarafından Caius Nocturne

Önce
Sonra
Değiştirilmemiş
Cihaz
Sony h.ear on 3
Type
teardown
Title
Sony h.ear on 3 Headband Arch teardown
Introduction
The headband arch is a very common point of failure on the Sony h.ear on 3. When I was tearing down my headphones, I tore down the headband arch after removing the headband from the speakers, partly out of curiosity and partly to help me try to superglue them together (take heed, the superglue did not work).
I don't want to let all the learning and pictures go to waste, so this goes through how you would go about tearing down the headband arch.
Because this is superfluous to a lot of repairs and because it doesn't have a specific point, I did not put prerequisite guides here. You can do this with a headband arch already disconnected, or you need to extract one from a pair of Sony h.ear on 3s, [link|https://www.ifixit.com/Guide/Sony+H.ear+on+3+Headband+replacement/143797|which you can do here|new_window=true].
Time Required Min
Tahmin yok
Time Required Max
Tahmin yok
Imageid
Önce
Sonra
Difficulty
Moderate
Author
Public
Hayır

Aletler

  • 1 x Opening Picks x1 added.
  • Spudger x1 added.
  • Anti-Static Project Tray x1 added.
  • JIS #000 Screwdriver x1 added.

İşaretler

  • Community-Contributed Guide added.

Adımlar

Adım #: 1
Önce
Sonra
Adım #: 2
Önce
Sonra
Adım #: 3
Önce
Sonra
Adım #: 4
Önce
Sonra
Adım #: 5
Önce
Sonra
Adım #: 6
Önce
Sonra
Adım #: 7
Önce
Sonra
Adım #: 8
Önce
Sonra