Ana içeriğe geç

Samsung Galaxy S Blaze Display Replacement Girişe yapılan değişiklikler

Düzenleyen: oldturkey03

Düzenleme onaylandı tarafından oldturkey03

Önce
Sonra
Değiştirilmemiş
Introduction
[ … ]The digitizer and the LCD are fused together. It is necessary to replace both, unless somebody has the equipment to release the bond between those LCD and the digitizer. This is a straight forward repair with no surprises and no hidden cables, clips or screws.
Time Required Min
30 dakika
Time Required Max
1 saat
Public
Hayır
Evet
Summary
Received this from a coworker to replace the display. Straight forward and not to difficult. The usual tough spots, the midframeback frame is a tight pressure fit and the display is glued to the midframe.front frame. A heatgun/hairdryer to loosen the glue is a must.
Received this from a coworker to replace the display. Straight forward and not to difficult. The usual tough spots, the midframeback frame is a tight pressure fit and the display is glued to the midframe.front frame. A heatgun/hairdryer to loosen the glue is a must.

Aletler

  • Phillips #00 Screwdriver x1 added.
  • iFixit Opening Tool x1 added.

Parçalar

  • Front Display Assembly x1 added.