Eşyalarını Tamir Et Topluluk Mağaza

Giriş Geçmişi: Prusa i3 MK3 X-Axis Belt Replacement

Düzenleyen: Alexander Collins —

Düzenleme onaylandı tarafından Alexander Collins

Önce
Sonra
Değiştirilmemiş
Introduction
If you are experiencing layer shiftshifting issues, or having any issues with the function of the X-axis belt, you may need to replace it. To replace the X-axis belt in your PRUSA i3 MK3, follow the steps in this guide. With heavy use, replacing the belt every 6-8 months is recommended. You will need a 2.5mm hex-bit screwdriver and a new X-axis belt. Ensure that you do not lose any of the parts or socket head screws that are removed during replacement.
Conclusion
To reassemble your device, follow these instructions in reverse order. During reassembly, ensuredo not to over-tighten the socket head screws too tight. Reference Step 4 for proper belt tension info.