Eşyalarını Tamir Et Topluluk Mağaza

Giriş Geçmişi: Portable Power Station Complete Disassembly

Düzenleyen: Kara Piepenbrink —

Düzenleme onaylandı tarafından Kara Piepenbrink

Önce
Sonra
Değiştirilmemiş
Cihaz
Hakko FX-888D
Type
disassembly
Thing
PPS
Title
Disassembling PPS
Introduction
Follow this guide to fully disassemble your FixHub | Power Series Portable Power Station.
The Portable Power Station includes all the tools you need to fully disassemble it in the box. The included [product|IF145-420|Precision Bit Driver|new_window=true] contains a Phillips and Torx bit stored under the swivel cap, as well as two Phillips screws to replace the Torx ones on the back cover. To learn more about "liberating" your power station, [click here].
If you're looking to create your own accessories, or if you're in the mood for some board-level repair, [link|https://ifixit.com|check out the schematics here|new_window=true].
Time Required Min
Tahmin yok
Time Required Max
Tahmin yok
Imageid
Önce
Sonra
Difficulty
Moderate
Conclusion
To reassemble your Portable Power Station, follow these instructions in reverse order.
Remember to [[Battery Calibration|calibrate your battery|new_window=true]] after reassembly if the battery health or capacity seem incorrect.
Repair didn't go as planned? Try some [[Troubleshooting Problems After a Repair|basic troubleshooting|new_window=true]], or ask our Answers community for help.
Author
Nick Schultz
Public
Hayır

Aletler

  • T10 Torx Security Bit Screwdriver x1 added.
  • Phillips #1 Screwdriver x1 added.
  • Spudger x1 added.
  • Angled Tweezers x1 added.
  • Large Needle Nose Pliers x1 added.

İşaretler

  • In Progress added.