Eşyalarını Tamir Et Topluluk Mağaza

Giriş Geçmişi: Audio-Technica AT-LP120XUSB Velocity PCB Replacement

Düzenleyen: ATUS Service Dept —

Düzenleme onaylandı tarafından ATUS Service Dept

Önce
Sonra
Değiştirilmemiş
Cihaz
Audio-Technica AT-LP120XUSB
Type
replacement
Thing
Velocity PCB
Title
Audio-Technica AT-LP120XUSB Velocity PCB Replacement
Introduction
This guide is used to provide step-by-step instructions for performing the replacement of
the Velocity PCB on the AT-LP120XUSB or AT-LP120XBT-USB. This procedure is used to resolve the following issues: 1) Inconsistent or no functionality when the Start/Stop button is pressed or On/Off dial is engaged. 2) Flickering red lights on power and speed switches.
No soldering is required to perform this repair.
Time Required Min
10 dakika
Time Required Max
30 dakika
Difficulty
Moderate
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
ATUS Service Dept
Public
Hayır

Aletler

  • Phillips #0 Screwdriver x1 added.
  • Phillips #1 Screwdriver x1 added.
  • Tweezers x1 added.

Parçalar

  • 704-120X-C057 x1 added.

İşaretler

  • In Progress added.
  • Community-Contributed Guide added.

Belgeler

  • Audio Technica Tone Arm Balancing Guide eklendi.

Adımlar

Adım #: 1
Önce
Sonra
stepid 376114 stepid 376114
Adım #: 2
Önce
Sonra
stepid 376115 stepid 376115
Adım #: 3
Önce
Sonra
stepid 376116 stepid 376116
Adım #: 4
Önce
Sonra
stepid 376117 stepid 376117
Adım #: 5
Önce
Sonra
stepid 376118 stepid 376118