Ana içeriğe geç

Changes to Cobra 29 LTD Classic Internal Speaker Replacement Introduction

Düzenleyen: Matt Williams

Düzenleme onaylandı tarafından Matt Williams

Silindi
Eklendi
Değiştirilmemiş
Introduction
The internal speaker is located inside the device and it is attached to the bottom cover. Perform the guide on a flat non-conductive surface to avoid electrical shock and damage to your device. [ … ] Some steps in this guide require soldering. For information on how to solder, see the [[Topic:Soldering|soldering guide.]]
The internal speaker is located inside the device and it is attached to the bottom cover. Perform the guide on a flat non-conductive surface to avoid electrical shock and damage to your device. [ … ] Some steps in this guide require soldering. For information on how to solder, see the [[Topic:Soldering|soldering guide.]]

Aletler

  • Phillips #1 Screwdriver x1 removed.
  • Desoldering Braid x1 removed.
  • Soldering Iron x1 removed.