Ana içeriğe geç

Installing a Professor Patch on a Patagonia Sweater Girişe yapılan değişiklikler

Düzenleyen: iRobot

Düzenleme onaylandı tarafından iRobot

Önce
Sonra
Değiştirilmemiş
Cihaz
Patagonia Sweater
Type
replacement
Title
Installing a Professor Patch on a Patagonia Sweater
Introduction
This guide will walk you through the steps necessary to patch the elbow of your Patagonia sweater. A piece of felted sweater or corduroy fabric will make a great patch for your sweater. Choose a patch color that compliments the color of your sweater. You can sew the patch on by hand if you don’t have a sewing machine. Whether you hand-sew or machine-sew, you will need a ballpoint needle to prevent any snagging while sewing. If you choose to sew by hand, simply ignore the steps involving the sewing machine. Whichever method you choose, be sure to only sew through the top layer of the sleeve, or else you’ll sew your sleeve shut! New to sewing? Check out our [[Sewing Glossary|sewing glossary.]]
Time Required Min
20 dakika
Time Required Max
25 dakika
Imageid
Önce
Sonra
Difficulty
Moderate
Conclusion
If you need further help, contact Patagonia Customer Service.
Author
Public
Evet
Summary
Patch the elbow of your sweater with a stylish professor patch.

Aletler

  • Ballpoint Needle x1 added.
  • Measuring Tape x1 added.
  • Utility Scissors x1 added.
  • Sewing Machine x1 added.
  • Sewing Pins x1 added.

Parçalar

  • Paper x1 added.
  • Patch Fabric x1 added.

İşaretler

  • Worn Wear added.

Adımlar

Step #: 1
Önce
Sonra
Step #: 2
Önce
Sonra
Step #: 3
Önce
Sonra
Step #: 4
Önce
Sonra
Step #: 5
Önce
Sonra
Step #: 6
Önce
Sonra
Step #: 7
Önce
Sonra
Step #: 8
Önce
Sonra
Step #: 9
Önce
Sonra
Step #: 10
Önce
Sonra
Step #: 11
Önce
Sonra
Step #: 12
Önce
Sonra