Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Mr. Coffee TF6 Bottom Cover Replacement Girişe yapılan değişiklikler

Düzenleyen: Andrew

Düzenleme onaylandı tarafından Andrew

Önce
Sonra
Değiştirilmemiş
Introduction
If you need to replaceThis guide is a necessary prerequisite for replacing or repairing the internals of the TF6 (hot plate, power cord, and water tubes). In the event of a broken bottom cover, you will need to salvage a bottom cover from another Mr. Coffee TF series coffee maker. You can use this guide to remove the replacement cover. must be obtained from a compatible unit.
If you need to replaceThis guide is a necessary prerequisite for replacing or repairing the internals of the TF6 (hot plate, power cord, and water tubes). In the event of a broken bottom cover, you will need to salvage a bottom cover from another Mr. Coffee TF series coffee maker. You can use this guide to remove the replacement cover. must be obtained from a compatible unit.
Summary
remove the bottom of your coffeemaker exposing the hot plate, power chord connections, and the water tube system; or if you need to replace the bottom cover. cover on the TF6.
remove the bottom of your coffeemaker exposing the hot plate, power chord connections, and the water tube system; or if you need to replace the bottom cover. cover on the TF6.

Aletler

  • 0.8x4x100 (mm) flathead screwdriver x1 removed.

Parçalar

  • Bottom Cover Mr. Coffee TF6 x1 removed.