Ana içeriğe geç

Mercedes W123 Turbo Elbow Seals Replacement Girişe yapılan değişiklikler

Düzenleyen: Nicolas Siemsen

Düzenleme onaylandı tarafından Nicolas Siemsen

Önce
Sonra
Değiştirilmemiş
Cihaz
Mercedes W123
Type
replacement
Thing
Turbo Elbow Seals
Title
Mercedes W123 Turbo Elbow Seals Replacement
Introduction
The seals on the turbo elbow are designed to keep unfiltered air from being sucked directly in to your turbo.
The top seal is renowned for being difficult to install and even seasoned mechanics install it in such a way that reduces its effectiveness. Replace yours, and install it properly!
Also, the lower seal on the turbo is prone to premature again due to exposure to heat from the turbo. It will dry out and become brittle, sealing less effectively.
In either case you could be letting unfiltered air reach your turbo. Help keep your turbo alive a lot longer by replacing these seals. Learn a few tricks, too, to make it easier.
Time Required Min
30 dakika
Time Required Max
30 dakika
Imageid
Önce
Sonra
Difficulty
Moderate
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
Public
Hayır
Summary
To get air from the air cleaner housing to the turbo, Mercedes installed a plastic elbow in between. This is sealed at both end with rubber seals. Check to see that yours are installed properly and are not dry and brittle.

İşaretler

  • In Progress added.

Adımlar

Step #: 1
Önce
Sonra
Step #: 2
Önce
Sonra
Step #: 3
Önce
Sonra
Step #: 4
Önce
Sonra
Step #: 5
Önce
Sonra
Step #: 6
Önce
Sonra
Step #: 7
Önce
Sonra
Step #: 8
Önce
Sonra
Step #: 9
Önce
Sonra