Ana içeriğe geç

Sanyo VPC S1275 Logic Board Replacement Giriş değişiklikleri

Düzenleyen: Spencer Lillywhite

Onay bekleniyor

Silindi
Eklendi
Değiştirilmemiş
Introduction
BeThis replacement requires 17 desolders to remove the old logic board and then 17 resolders for the new board. Unless you feel very confident in your soldering abilities, you could end up damaging the camera much worse. Also, be careful when handling the camera after taking the casing off because the camera's capacitor for the flash can shock you. Use this guide to gain access to and replace the logic board.
BeThis replacement requires 17 desolders to remove the old logic board and then 17 resolders for the new board. Unless you feel very confident in your soldering abilities, you could end up damaging the camera much worse. Also, be careful when handling the camera after taking the casing off because the camera's capacitor for the flash can shock you. Use this guide to gain access to and replace the logic board.
Public
Evet
Hayır

Aletler

  • Capacitor Discharge Tool x1 added.

Adımlar

Step #: 1
Önce
Sonra
Step #: 2
Önce
Sonra
Step #: 3
Önce
Sonra
Step #: 4
Önce
Sonra
Step #: 5
Önce
Sonra
Step #: 6
Önce
Sonra
Step #: 7
Önce
Sonra
Step #: 8
Önce
Sonra
Step #: 9
Önce
Sonra
Step #: 10
Önce
Sonra