Ana içeriğe geç

Sanyo VPC S1275 Logic Board Replacement Giriş değişiklikleri

Düzenleyen: Spencer Lillywhite

Onay bekleniyor

Silindi
Eklendi
Değiştirilmemiş
Title
DisassemblingInstalling Sanyo VPC S1275 Logic Board
DisassemblingInstalling Sanyo VPC S1275 Logic Board
Introduction
on disassembing the installing a new logic board. board or re-install the old one. Removing the logic board requires 17 desolders to remove the old logic board. To install a new logic board, then 17 resolders need to be done. Unless you feel very confident in your soldering abilities, you could end up disassembling the the logic board and not be able to reassemble it. Also, be careful when handling the camera after taking the casing off because the camera's capacitor for the flash can shock you. Use this guide to gain access to and replace the logic board.
on disassembing the installing a new logic board. board or re-install the old one. Removing the logic board requires 17 desolders to remove the old logic board. To install a new logic board, then 17 resolders need to be done. Unless you feel very confident in your soldering abilities, you could end up disassembling the the logic board and not be able to reassemble it. Also, be careful when handling the camera after taking the casing off because the camera's capacitor for the flash can shock you. Use this guide to gain access to and replace the logic board.
Public
Evet
Hayır

Adımlar

Step #: 1
Önce
Sonra
Step #: 2
Önce
Sonra
Step #: 3
Önce
Sonra
Step #: 4
Önce
Sonra
Step #: 5
Önce
Sonra
Step #: 6
Önce
Sonra
Step #: 7
Önce
Sonra
Step #: 8
Önce
Sonra
Step #: 9
Önce
Sonra