Ana içeriğe geç

iPhone 6 Logic Board Replacement Girişe yapılan değişiklikler

Düzenleyen: Sam Goldheart

Düzenleme onaylandı tarafından Sam Goldheart

Önce
Sonra
Değiştirilmemiş
Introduction
Use this guide to remove or replace a faulty logic board in your iPhone 6.
It's important to note that each iPhone's logic board and Touch ID fingerprint sensor are paired at the factory, so replacing the logic board will disable Touch ID ''unless'' you also install a replacement home button that has been properly paired to your new logic board.
'''You can also use this guide to replace the following parts:'''
*
[https://www.ifixit.com/Guide/iPhone+6+Logic+Board+Replacement/30696#s71886|Upper Cable Bracket]
* Logic Board Antenna Flex Cable.

Parçalar

  • iPhone 6 Logic Board Antenna Flex Cable x1 removed.