Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Xelio P1001A-BK Wi-Fi Antenna Replacement Girişe yapılan Değişiklikler

Düzenleyen: Michael Case

Düzenleme onaylandı tarafından Michael Case

Önce
Sonra
Değiştirilmemiş
Introduction
insulator(plastic), wire braid shield(middle layer), and center conductor(inner layer). layer) surrounded by an insulator. The connecting points of the coaxial wire to the motherboard are very small and may require a magnifying glass to see clearly. [ ] As soldering will be required for this guide, make sure there is good ventilation for the work space to draw the solder fumes away. Make sure the soldering iron has a proper stand to hold it while not being used to prevent suffering burns or damage other components from accidental contact with the hot tip.
insulator(plastic), wire braid shield(middle layer), and center conductor(inner layer). layer) surrounded by an insulator. The connecting points of the coaxial wire to the motherboard are very small and may require a magnifying glass to see clearly. [ ] As soldering will be required for this guide, make sure there is good ventilation for the work space to draw the solder fumes away. Make sure the soldering iron has a proper stand to hold it while not being used to prevent suffering burns or damage other components from accidental contact with the hot tip.
Imageid
Önce
Sonra

Kılavuz Ön Koşulları

Aletler

  • 25-40 Watt Soldering Iron x1 added.
  • Flat Needle Nose Pliers x1 added.
  • Magnifying lens x1 added.