Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Xelio P1001A-BK Wi-Fi Antenna Replacement Girişe yapılan Değişiklikler

Düzenleyen: Michael Case

Düzenleme onaylandı tarafından Michael Case

Önce
Sonra
Değiştirilmemiş
Introduction
The wire that connects the Wi-Fi antenna to the motherboard is a coaxial wire. The coaxial wire consists of a wire insulator(plastic), wire braid shield(middle layer), and center conductor(inner layer) surrounded by an insulator. The connecting points of the coaxial wire to the motherboard are very small and may require a magnifying glass to see clearly. [ … ] As soldering will be required for this guide, make sure there is good ventilation for the work space to draw the solder fumes away. Make sure the soldering iron has a proper stand to hold it while not being used to prevent suffering burns or damage other components from accidental contact with the hot tip.
The wire that connects the Wi-Fi antenna to the motherboard is a coaxial wire. The coaxial wire consists of a wire insulator(plastic), wire braid shield(middle layer), and center conductor(inner layer) surrounded by an insulator. The connecting points of the coaxial wire to the motherboard are very small and may require a magnifying glass to see clearly. [ … ] As soldering will be required for this guide, make sure there is good ventilation for the work space to draw the solder fumes away. Make sure the soldering iron has a proper stand to hold it while not being used to prevent suffering burns or damage other components from accidental contact with the hot tip.