Ana içeriğe geç

How to Replace the Fan Blade Assembly on the Utilitech SFC-1 500B 20 " High Velocity Floor Fan Giriş değişiklikleri

Düzenleyen: EngineeringCorpsman

Düzenleme onaylandı tarafından EngineeringCorpsman

Silindi
Eklendi
Değiştirilmemiş
Cihaz
[ ]Utilitech SFC-1 500B 20 " High Velocity Floor Fan
Type
[ ]how-to
Title
[ ]How to Replace the Fan Blade Assembly on the Utilitech SFC-1 500B 20 " High Velocity Floor Fan
Introduction
[ ]The purpose of this technical description is to explore the Utilitech SFC1-500B 20” High Velocity Floor Fan at the system-level, then discuss the important parts directly related to using the device. This description will give the user a basic idea of fan’s design and operation so as to become more proficient in its use.
Time Required Min
45 dakika
Time Required Max
1 saat
Imageid
Önce
Sonra
Difficulty
Easy
Conclusion
[ ]To reassemble your device, follow these instructions in reverse order.
Author
Public
Hayır
Summary
[ ]This guide will educate the reader how to break down the fan in order to remove the fan blade assembly, the part that combines the fan blades and motor.

Aletler

  • Phillips #2 Screwdriver x1 added.
  • 8mm Nut Driver x1 added.
  • Magnetic Project Mat x1 added.

Parçalar

  • Replacement fan-blade assembly (purchased directly from Utilitech) x1 added.

İşaretler

  • In Progress added.
  • Student In Progress added.

Adımlar

Step #: 1
Önce
Sonra
Step #: 2
Önce
Sonra
Step #: 3
Önce
Sonra
Step #: 4
Önce
Sonra
Step #: 5
Önce
Sonra
Step #: 6
Önce
Sonra
Step #: 7
Önce
Sonra
Step #: 8
Önce
Sonra
Step #: 9
Önce
Sonra
Step #: 10
Önce
Sonra