Ana içeriğe geç

MacBook Pro 13" Retina Display Early 2015 Trackpad Replacement Girişe yapılan değişiklikler

Düzenleyen: Adam O'Camb

Düzenleme onaylandı tarafından Adam O'Camb

Önce
Sonra
Değiştirilmemiş
Introduction
Does your Force Touch trackpad require a bit more force than it used to? Taptic engine acting up? Use this guide to replace the trackpad in your Early 2015 13" MacBook Pro.
'''Have a replacement battery ready before starting this guide.''' The MacBook Pro’s glued-in battery has to be removed in order to access the trackpad, and for safety reasons it should not be re-used after your repair.
This procedure involves using adhesive remover to remove the battery. '''Do not reuse the battery after it has been removed, as doing so is a potential safety hazard.''' Replace it with a new battery.
'''iFixit adhesive remover is highly flammable.''' Perform this procedure in a well-ventilated area. Do not smoke or work near an open flame during this procedure.
'''To minimize risk of damage, turn on your MacBook and allow the battery to fully discharge before starting this procedure.''' A charged lithium-ion battery can create a dangerous and uncontrollable fire if accidentally punctured. If your battery is swollen, [[What to do with a swollen battery|take extra precautions|new_window=true]].