Ana içeriğe geç

Fix Your Stuff

Right to Repair

Parts & Tools

Changes to Samsung Galaxy S6 Edge Rear Glass Adhesive Replacement Introduction

Düzenleyen: Sam Goldheart

Düzenleme onaylandı tarafından Sam Goldheart

Silindi
Eklendi
Değiştirilmemiş
Introduction
Removing the rear glass panel from your Galaxy S6 Edge destroys the adhesive holding it in place. Follow this guide to replace the adhesive tape on your Galaxy S6 Edge rear glass. Most adhesive strips will come packaged as shown, although the film dimensions and color may vary. [ … ] Before beginning, we recommend you remove any residual adhesive from the glass panel using a q-tip and solvent such as isopropyl alcohol. [ … ] '''This guide was performed on a Samsung Galaxy S6 (non Edge) but the procedure is exactly identical. Be sure that you buy S6 Edge adhesive, and that it matches the adhesive you pulled off of the rear glass, as it may differ from the adhesive shown in this guide.'''
Imageid
Önce
Sonra
Conclusion
To reassemble your device, follow these instructions in reverse order.[ ]
To reassemble your device, follow these instructions in reverse order.[ ]
Summary
[ ]Replace the adhesive on your Galaxy S6 Edge rear glass panel to close it back up after a repair.

Kılavuz Ön Koşulları

Aletler

  • X-ACTO Knife x1 added.
  • Tweezers x1 added.