|
Introduction |
If you needThis step-by-step guide demonstrates how to remove the back cover of this camera, this guide will show how to do it. It shows step by step, how to find each of the hidden screws and how to take off each part. | | It is very important to remember from where you removed these of these screws. They are of differing lengths and some, if installed in a different hole, may cause damage to the camera. It's a good idea to get a small ice cube tray or egg carton and put each screw in its own cup. Make notes on a piece of paper showing where each screw came from. | | It's important to note where each screw is removed. If installed incorrectly, it may damage the camera. | | TIPS:
* Use an ice cube tray or egg carton, place each screw in its own cup.
* Make notes on a piece of paper.
You will need a tiny PhillipsPhilips screwdriver (#00). |
|