Eşyalarını Tamir Et Topluluk Mağaza

Giriş Geçmişi: Repairing Flute Felt Key Pads

Düzenleyen: Luke Williams —

Düzenleme onaylandı tarafından Luke Williams

Önce
Sonra
Değiştirilmemiş
Cihaz
Flute
Type
repair
Thing
Felt Pads
Title
Repairing Flute Felt Pads
Introduction
The flute I'm about to show how to repair is a French model flute (open hole keys). However, this method is applicable to the plateau model as well as other types of traditional concert flutes (bass, piccolo, etc.)
Time Required Min
2 dakika
Time Required Max
30 dakika
Imageid
Önce
Sonra
Difficulty
Moderate
Conclusion
To reassemble your device, follow these instructions in reverse order and reposition the springs.
Author
Luke Williams
Public
Hayır

Aletler

  • Screwdriver Standard 1.5mm x1 added.
  • Tweezers Ridged x1 A woodwind spring hook/fork tool would be ideal, but tweezers that have a ridged surface work well too added.
  • Teflon tape 3/4"-1" x1 1" is preferable added.
  • Rolling Paper x1 Can be found at local convenient stores or anywhere where tobacco is sold. added.
  • Scissors x1 added.
  • Magnetic Mat Replacement Pen x1 added.
  • Oil Absorbing Sheets x1 added.

Parçalar

  • Flute Paper Shims 9mm-9.5mm center hole, .002"-.004" thick x1 The amount needed depends on the condition of the flute pads. However, they are typically purchased in packs of 100. (featured) added.

İşaretler

  • In Progress added.
  • Student In Progress added.

Adımlar

Adım #: 1
Önce
Sonra
stepid 110445 stepid 110445