Ana içeriğe geç

Installing N-Strike Recon CS-6 Stage 1 and Stage 2 Performance Kits Giriş değişiklikleri

Düzenleyen: Bob Somers

Onay bekleniyor

Silindi
Eklendi
Değiştirilmemiş
Cihaz
[ ]Nerf N-Strike Recon
Type
[ ]installation
Thing
[ ]"Stage 1" and "Stage 2" Performance Kits from Orange Mod Works
Title
[ ]Installing Nerf N-Strike Recon "Stage 1" and "Stage 2" Performance Kits from Orange Mod Works
Introduction
The Nerf N-Strike Recon is a great foam dart blaster which can be found for around $20. Like most blasters, the range is about 30-35 feet. However, with the "Stage 1" and "Stage 2" mod kits from [http://orangemodworks.com/|Orange Mod Works], the blaster's internal parts can be upgraded to attain 80 foot ranges and muzzle velocities in excess of 90 feet per second. [ … ] Pardon the poor quality images. I only had my camera phone available while installing the kits. If you've got better images, please contribute them!
Time Required Min
1 saat
Time Required Max
1 saat
Difficulty
Moderate
Conclusion
[ ]All finished! Please be safe and responsible with this blaster! After modification, this is no longer a toy for children. Close range shots can hurt and poking around the internals with a finger during operation could potentially cause injury. Be careful!
Author
Public
Hayır
Summary
[ ]The Nerf N-Strike Recon CS-6 is a currently available blaster that is relatively easy to modify. The guys at Orange Mod Works have produced two mod kits which upgrade all the plastic internals to custom metal parts.

Aletler

  • Hammer x1 added.
  • Phillips #0 Screwdriver x1 added.
  • Small saw, file, or Dremel rotary tool x1 added.

Parçalar

  • Orange Mod Works "Stage 1" Performance Kit x1 added.
  • Orange Mod Works "Stage 2" Performance Kit x1 added.

İşaretler

  • In Progress added.

Adımlar

Step #: 1
Önce
Sonra