Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Kodak ESP C315 - How to reseat printhead ribbon cable Girişe yapılan Değişiklikler

Düzenleyen: infiniti25

Düzenleme onaylandı tarafından infiniti25

Önce
Sonra
Değiştirilmemiş
Title
HowKodak ESP C315 - How to reseat printhead ribbon cable on a Kodak ESP C315 cable
HowKodak ESP C315 - How to reseat printhead ribbon cable on a Kodak ESP C315 cable
Introduction
[ ]I was at a friend's house looking at his dad's printer, a Kodak ESP C315 and for some reason the ribbon cable came loose. This prevented the printer from controlling and moving the printhead/cartridge tray. Follow along for the technique I used to fix it.
Conclusion
To reassemble your device, follow these instructions in reverse order.Run the printer's maintenance cleaning procedure as you would normally and try a test print and it should be good to go
To reassemble your device, follow these instructions in reverse order.Run the printer's maintenance cleaning procedure as you would normally and try a test print and it should be good to go
Public
Hayır
Evet
Summary
I was at a friend's house looking at his dad's printer, a Kodak ESP C315 and for some reason the ribbon cable came loose. This preventedOpen the printer from controlling and moving the printhead/cartridge tray. Follow along for the technique I used printhead assembly to fix it. reseat a disconnected ribbon cable
I was at a friend's house looking at his dad's printer, a Kodak ESP C315 and for some reason the ribbon cable came loose. This preventedOpen the printer from controlling and moving the printhead/cartridge tray. Follow along for the technique I used printhead assembly to fix it. reseat a disconnected ribbon cable

İşaretler

  • In Progress removed.