Ana içeriğe geç

1986-1993 Volvo 240 Wheel Adapters Replacement Girişe yapılan değişiklikler

Düzenleyen: David Hodson

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş
Introduction
There are multiple reasons to install wheel adapters on your Volvo 240. You may have spent a whole lot of money on racing wheels that ended up being the wrong size and now you can't return them. Perhaps there are some wheels you've had your eye on that are a different bolt pattern than the stock 5x108 Volvo wheels. Whatever your reason, wheel adapters will allow you to install wheels with a different bolt pattern than your factory wheels.
Wheel adapters, just like wheel spaces, place the wheel farther away from the stock hub location. This may cause excessive stress on your suspension if the adapters are too large. Also, very thick adapters may force you to roll the fenders of your car to keep the tires from rubbing against them.
Imageid
Önce
Sonra

Kılavuz Ön Koşulları

Aletler

  • 15 mm Box End Wrench x1 added.
  • Socket 19mm x1 added.
  • Hydraulic Floor Jack x1 added.
  • Impact Wrench x1 added.
  • Jack Stand x1 added.

Adımlar

Step #: 1
Önce
Sonra