Ana içeriğe geç

iRobot Roomba 870 Bumper Sensor Replacement Girişe yapılan değişiklikler

Düzenleyen: Jacob Lindberg

Düzenleme onaylandı tarafından Jacob Lindberg

Önce
Sonra
Değiştirilmemiş
Introduction
Is your Roomba not able to sense surrounding obstacles, preventing it from avoiding such barriers? If so, here is the guide to fix the problem with a simple change of the bumper sensor. All you need is a standard #0 and #1 Phillips Screwdriver heads in order to remove the two types of screws involved in this replacement.
Time Required Min
30 dakika
Time Required Max
30 dakika
Summary
This guide provides the steps necessary to replace the infrared bumper sensor attached to the front of the iRoomba Robot.iRobot Roomba 870