Ana içeriğe geç

Acer S1210 DLP Projector Colour Wheel Replacement Girişe yapılan değişiklikler

Düzenleyen: Philip Le Riche

Düzenleme onaylandı tarafından Philip Le Riche

Önce
Sonra
Değiştirilmemiş
Cihaz
Acer S1210 DLP Projector
Type
replacement
Thing
Colour Wheel
Title
Acer S1210 DLP Projector Colour Wheel Replacement
Introduction
A DLP projector creates the image using a digital micromirror device (DMD). This contains one micromirror per pixel, which can be electrically deflected to reflect light from the lamp either through the lens and on to the screen, or into a light sump where it is absorbed. It is essentially a monochrome device and so a rapidly spinning colour wheel is placed in front of the lamp, which passes each of the three primary colours in turn. This allows the colour image to be built up from the red, green and blue components projected one after the other.
A faulty colour wheel is indicated in this projector by the Lamp indicator LED on the control panel flashing, but can also be indicated by the image flickering different colours. A replacement colour wheel is quite easily fitted.
Time Required Min
1 saat
Time Required Max
1 saat
Imageid
Önce
Sonra
Difficulty
Moderate
Conclusion
To reassemble your device, follow these instructions in reverse order.
Author
Public
Hayır
Summary
Disassembly and replacement of the colour wheel.

İşaretler

  • In Progress added.
  • Member-Contributed Guide added.

Adımlar

Step #: 1
Önce
Sonra
Step #: 2
Önce
Sonra
Step #: 3
Önce
Sonra
Step #: 4
Önce
Sonra
Step #: 5
Önce
Sonra
Step #: 6
Önce
Sonra
Step #: 7
Önce
Sonra
Step #: 8
Önce
Sonra
Step #: 9
Önce
Sonra
Step #: 10
Önce
Sonra
Step #: 11
Önce
Sonra
Step #: 12
Önce
Sonra
Step #: 13
Önce
Sonra