Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

iPhone 7 Plus LCD and Digitizer Replacement Girişe yapılan değişiklikler

Düzenleyen: Jeff Suovanen

Düzenleme onaylandı tarafından Jeff Suovanen

Önce
Sonra
Değiştirilmemiş
Cihaz
[ ]iPhone 7 Plus
Type
[ ]replacement
Thing
[ ]LCD Screen and Digitizer
Title
[ ]iPhone 7 Plus LCD Screen and Digitizer Replacement
Introduction
Use this guide to replace a cracked or broken screen in an iPhone 7 Plus. This includes removing the front-facing camera and sensor assembly, earpiece speaker, display EMI shield, and home/Touch ID sensor assembly—all of which must be transferred to your new display. For an easier repair, replace the entire display assembly instead by following [https://www.ifixit.com/Guide/iPhone+7+Plus+Display+Assembly+Replacement/67563|this much shorter guide]. [ … ] In either case, it's important to carefully transfer the original home/Touch ID sensor onto the new display in order for it to function.
Time Required Min
Tahmin yok
Time Required Max
Tahmin yok
Imageid
Önce
Sonra
Difficulty
Moderate
Conclusion
[ ]To reassemble your device, follow these instructions in reverse order.
Author
Public
Hayır
Summary
[ ]Replace just the bare front panel—not including the home/Touch ID sensor, front-facing camera and sensor cable, or earpiece speaker—in an iPhone 7 Plus.

Kılavuz Ön Koşulları

Aletler

  • P2 Pentalobe Screwdriver iPhone x1 added.
  • iOpener x1 added.
  • Suction Handle x1 added.
  • iFixit Opening Picks set of 6 x1 added.
  • Spudger x1 added.
  • Tri-point Y000 Screwdriver x1 added.
  • Tweezers x1 added.
  • Phillips #000 Screwdriver x1 added.
  • iFixit Opening Tools x1 added.

İşaretler

  • In Progress added.

Adımlar

Step #: 1
Önce
Sonra
Step #: 2
Önce
Sonra
Step #: 3
Önce
Sonra
Step #: 4
Önce
Sonra
Step #: 5
Önce
Sonra
Step #: 6
Önce
Sonra