3. Adımdaki Değişiklikler
Düzenleyen: Alex Diaz-Kokaisl —
Düzenleme onaylandı tarafından Alex Diaz-Kokaisl
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] [guide|25705|Heat an iOpener|new_window=true] and thread it through the arms of the Anti-Clamp. | |
| + | [* icon_note] You can also use a [guide|157348|hair dryer|new_window=true], [guide|151116|heat gun|new_window=true], or hot plate—but extreme heat can damage the display and/or internal battery, so proceed with care. |
| [* black] Fold the iOpener so it lays on the bottom edge of the iPhone. | |
| [* black] Wait one minute to give the adhesive a chance to release and present an opening gap. | |
| [* black] Insert an opening pick into the gap. | |
| [* icon_note] If the Anti-Clamp doesn't create a sufficient gap, apply more heat to the area and rotate the handle a quarter turn. | |
| [* icon_caution] Don't crank more than a quarter turn at a time, and wait one minute between turns. Let the Anti-Clamp and time do the work for you. | |
| [* black] ***Skip the next three steps.*** |