Ana içeriğe geç

2. Adımdaki Değişiklikler

Düzenleyen: Marty Rippens

Düzenleme onaylandı tarafından Marty Rippens

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Loosen the (1) 3mm Phillips 0 screw attaching the wireless card to the computer, using a 54 bit driver kit, until there is enough room for the wireless card to be lifted past the height of the screw
+[* black] Loosen the 3mm Phillips #0 screw attaching the wireless card to the computer until there is enough room for the wireless card to be lifted past the height of the screw.
[* icon_note] One or both of the antenna cables attached to the wireless card during may pop off during this step. This is ok.