| - | [* red] Turn the computer to the side and locate the four screws on the side of the display (marked in photo) |
|---|
| - | [* red] Unscrew all four 0.8 mm Phillips screws and repeat on the opposite side |
|---|
| - | [* black] Then push the metal plates/rods that were attached to the display towards the top cover |
|---|
| - | [* orange] The display should be completely free of the top cover and able to lay flat on the keyboard (refer to photo #2) |
|---|
| + | [* red] Use a Phillips #00 screwdriver to unscrew all four 0.8 mm screws from the left side of the display frame. Repeat for the right side. |
|---|
| + | [* black] Push the metal plates/rods that were attached to the display towards the top cover. |
|---|
| + | [* orange] The display should be completely free of the top cover and able to lay flat on the keyboard (refer to photo #2). |
|---|