| - | [* black] Remove the two screws holding the motherboard to the back of the controller housing. Then Remove the motherboard assembly from the controller housing, by pressing in the clips on each side of the handle. This will give better access to the charging port. |
|---|
| + | [* black] Remove the two screws holding the motherboard to the front controller housing. |
|---|
| + | [* black] Next, remove the motherboard assembly from the controller housing. This is done by pressing in the clips on each side of the handle. |
|---|
| + | [* black] Freeing the motherboard from the housing will provide better access to the charging port. |
|---|