17. Adımdaki Değişiklikler
Düzenleyen: johnsawyercjs —
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Remove the following 13 screws securing the logic board to the rear case: | |
| [* red] Six 7.2 mm coarse-thread T10 Torx. | |
| - | [* orange] Two 6.8 mm T8 Torx. |
| + | [* orange] Two 6.8 mm T8 Torx. When reinstalling these two screws, don't overtighten them, as the plastic tabs they hold down are thin and brittle, and can crack. |
| [* yellow] Three 7 mm fine-thread T10 Torx. | |
| [* green] Two 24 mm T10 Torx. |