Ana içeriğe geç

18. Adımdaki Değişiklikler

Düzenleyen: johnsawyercjs

Onay bekleniyor

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Lift the logic board out of the rear case, minding any cables that may get caught.
+[* black] Lift the logic board out of the rear case, minding any cables that may get caught. If the front edge of the logic board, under the RAM sockets, won't pull up, it's sticking on the three plastic mounting pins in the rear housing under this edge. Use either your fingernails, or a spudger, under the front edge of the RAM sockets to gently push up on this edge until it clears these mounting pins.