7. Adımdaki Değişiklikler
Düzenleyen: Arthur Shi —
Düzenleme onaylandı tarafından Arthur Shi
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| [* black] Pull up on the suction cup with firm, constant pressure to create a slight gap between the front panel and rear case. | |
| - | [* black] Insert an opening pick into the gap. |
| + | [* black] Insert an opening pick into the gap under the [link|https://guide-images.cdn.ifixit.com/igi/HwCOLReNpjJpwNVk.full|screen and the plastic bezel|new_window=true], ***not the screen itself.*** |
| [* icon_note] The watertight adhesive holding the display in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your tool. |