Eşyalarını Tamir Et Topluluk Mağaza

2. Adımdaki Değişiklikler

Düzenleyen: Taylor Dixon —

Düzenleme onaylandı tarafından Taylor Dixon

Önce
Sonra
Değiştirilmemiş

Adım Satırları

[title] Screw thread contact and LED controller
-[* black] Start with carefully removing the remaining broken glass parts on the Philips lightbulb. On this example, glass parts were removed previously.
-[* black] Use your Groove Joint Pliers to gently crush the screw thread contact from the IKEA lightbulb.
+[* black] Start by carefully removing the remaining broken glass parts from the Philips Hue lightbulb. On this example, glass parts have already been removed.
+[* black] Then use your Groove Joint Pliers to gently crush and remove the screw thread contact of the IKEA lightbulb.
[* black] Once removed, you'll be able to extract the LED controller using your fingers. You might have to use a pliers again.