Ana içeriğe geç

1. Adımdaki Değişiklikler

Düzenleyen: Aiden

Düzenleme onaylandı tarafından Aiden

Önce
Sonra
Değiştirilmemiş

Adım Satırları

-[* black] Using a spudger, lift up on the black connector of the ZIF socket on the end of the ribbon cable connecting to the fingerprint reader.
- [* icon_caution] Be sure to make sure your pulling up the tab, not the socket! if you pull the socket you will damage the motherboard. You can check how to disconnect the cable using [guide|25629|this guide|stepid=64969]
+[* black] Using a spudger, lift up on the black connector of the ZIF socket on the end of the ribbon cable connecting to the fingerprint reader[http://www.ifixit.com/Tools/Spudger/IF145-002|.]
+ [* icon_caution] Be sure to make sure your pulling up the tab, not the socket! if you pull the socket you will damage the motherboard. You can check how to disconnect the cable using [guide|25629|this guide|stepid=64969][product|IF145-115-1|.]
[* black] Disconnect the cable from the socket.
-[* red] Remove 1 JIS1 screw securing the bracket in place.
+[* red] Remove 1 JIS1 screw securing the bracket in place[http://www.ifixit.com/Tools/Tweezers/IF145-020-5|.]