Ana içeriğe geç

8. Adımdaki Değişiklikler

Düzenleyen: Andrew Bookholt

Onay bekleniyor

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* red] Use an 8 mm bit driver to remove the four hex-head bolts from around the perimeter of the boiler (only two are shown).
[* red] Remove the small2 mm hex set screw from the steam valve knob and pull it away from the piping to remove it from the barista.
[* red] Remove the small2 mm hex set screw from the steam valve knob and pull it away from the piping to remove it from the barista.
[* black] At this point, the boiler is free from the Barista and can be removed.