Ana içeriğe geç

10. Adımdaki Değişiklikler

Düzenleyen: cardogab7341

Düzenleme onaylandı tarafından Miroslav Djuric

Silindi
Eklendi
Değiştirilmemiş

Adım Satırları

[* black] Use a flat blade screwdriver to separate the two halves of the boiler. Inside the boiler, you can see the main components:
[* orange] Boiler housing (to contain water and steam).
[* green] Heater coil.
[* blue] Dual thermal sensors, presumably one to maintain steam temperature and one for max temperature shut down.
[* icon_note] The bottom portion of the boiler housing has a rigid hose reaching toward the top of the boiler to collect steam for brewingdraw water from the coffeetop to keep the heater coil immersed in water.
[* icon_note] The bottom portion of the boiler housing has a rigid hose reaching toward the top of the boiler to collect steam for brewingdraw water from the coffeetop to keep the heater coil immersed in water.
[* black] There are also two Klixon thermal sensors. The numbers stamped around their bases are:
[* black] 1NT01L-0036 L95-10 9910 M 10/250~T200
[* black] 1NT01L-0499 L127-15 9912 M 10/250~T200