2. Adımdaki Değişiklikler
Düzenleyen: Nicholas Greco —
Düzenleme onaylandı tarafından Nicholas Greco
- Önce
- Sonra
- Değiştirilmemiş
Adım Satırları
| - | [* red] Remove the ten 12 mm screws with the Torx size 9. |
|---|---|
| - | [* orange] Remove the last two 12 mm screws to unclasp the screen plate. |
| - | [* black] Remove the cover that you just unscrewed. |
| + | [* red] Remove the last ten 12mm screws by placing the Torx 9 screwdriver in the screw slot and turning counterclockwise. |
| + | [* orange] Remove the last two 12mm screws by placing the Torx 9 screwdriver in the screw slot and turning counterclockwise. |
| + | [* black] Separate the screen plate from the device after all the screws are removed by pushing the plate to the right, up and then pulling out. |
| + | [* black] Take out the inner plastic frame (this piece is removeable after having removed the ten 12 mm screws outlined in the first bullet) by grasping the frame with both hands and carefully pulling the frame away from the printer body. |